10 Best Hybrid Table Saw in 2020 : Reviews & Buying Guide


When buying table saws, you may have different problems with the selection and go ahead to choose the worst option. That’s why we dedicate our time to getting the best hybrid table saw below 1000 that can serve your purpose and still fit your budget.

Table saws have different problems, but hybrid table saws are more complicated and sophisticated than normal ones. This is because hybrid table saws can be used for different purposes, whereas the normal table saw has only one purpose. This is one of the most efficient tools used in carpentry to cut objects.

It is driven by an electric motor that allows the blades to continue rolling, thus cutting any object you want to cut. A hybrid table saw is popularly used for different purposes at the same time.

Our Top Pick

Last update on 2022-11-24 / Affiliate links / Images from Amazon Product Advertising API

Top 10 Best Hybrid Table Saws To Buy In 2021

Last update on 2022-11-13 / Affiliate links / Images from Amazon Product Advertising API

10 Best Hybrid Table Saws Review

Bestseller No. 1
Shop Fox W1837 10" 2 hp Open-Stand Hybrid Table Saw
  • 2 HP, 120V/240V, single-phase motor prewired to run on a 120V, 20A circuit
  • Enclosed cabinet bottom with 4" dust port
  • Precision-ground cast iron table with steel wings measures 401/4" x 27"
  • Rip capacity: 30" to right, 15" to left
  • Lift-off fence with front/rear locking ability
Bestseller No. 2
NEW SEARS CRAFTSMAN HYBRID TABLE SAW ZERO CLEARANCE INSERT by Peachtree Woodworking PW 946 Approx Dims 13-11/32 in x 3-3/4 in x 1/2 in
  • The insert is blank so you can custom fit the blade slot by passing your blade through it.
  • Helps to prevent tear-out plus close the large factory gap.
  • Models 22104 - 22114 - 22124
  • 13 11/32" X 3 3/4" - Made of UHMW
Bestseller No. 3
Grizzly Industrial G0899-10" Hybrid Table Saw
  • Includes full manufacturer warranty
SaleBestseller No. 4
DEWALT Table Saw for Jobsite, Compact, 8-1/4-Inch (DWE7485)
  • Portability: Compact size for ease of transportation and storage
  • Easy adjustments: Rack and pinion telescoping fence rails make fence adjustments fast, smooth and accurate
  • Variety of cuts: 24.5 inches of rip capacity for ripping 4x8 plywood or OSB sheets
  • Power: 15 Amp, 5800 rpm motor
  • Onboard storage: Onboard storage provides easy access to the site pro guarding components and push stick when not in use
SaleBestseller No. 6
Rockwell RK7323 BladeRunner X2 Portable Tabletop Saw with Steel Rip Fence, Miter Gauge & 7 Accessories
  • [SETS UP IN SECONDS] Take this table saw to the job site or move it around the workshop. There’s even a built-in carry handle
  • [CUTS LIKE A FULL-SIZE] With the standard guard and riving knife system you can perform rip, cross, scroll, and miter cuts
  • [TOOL-LESS BLADE CHANGE] Uses any brand’s standard 4” T-shank blade, but we threw 5 in the box to get you started cutting wood, ceramic tile, plastic, aluminum, and metal
  • [0-60° MITER CUTS] With the adjustable gauge you can pull off precise miter cuts for a whole assortment of woodworking projects
  • [ON-BOARD ACCESSORY STORAGE] When the miter gauge, rip fence, and extra blades aren’t in use they can be conveniently housed in the base of the saw
Bestseller No. 7
The Great Beyond Revealed
  • Amazon Prime Video (Video on Demand)
  • Bruce Leininger, Terry Lovelace (Actors)
  • --- (Director) - Lisa Honeywell (Producer)
  • English (Playback Language)
  • English (Subtitle)
SaleBestseller No. 8
Rustic Modern
  • Hardcover Book
  • Ewald, Chase Reynolds (Author)
  • English (Publication Language)
  • 212 Pages - 08/08/2017 (Publication Date) - Gibbs Smith (Publisher)
Bestseller No. 9
Two Buddhas Seated Side by Side: A Guide to the Lotus Sūtra
  • Amazon Kindle Edition
  • Lopez, Donald S. (Author)
  • English (Publication Language)
  • 306 Pages - 10/01/2019 (Publication Date) - Princeton University Press (Publisher)
Bestseller No. 10
Stauer Centurion Hybrid Men's Watch
  • Turning bezel
  • Contrast stitched black band
  • Alloy case
  • Backlight
  • Wrist accommodates 7.25” to 8.75"

Last update on 2022-11-13 / Affiliate links / Images from Amazon Product Advertising API

What is a Hybrid Table Saw?

There are three major types of saw; Portable, Contractor, and Cabinet. Portable saws are small and low priced tools used for small jobs, while a contractor’s saw is larger and more powerful. Contractor saws are the most common. Cabinet saws, on the other hand, are more expensive, since they are more powerful and with a larger surface to work on.

A hybrid table saw is a combination of the contractor’s saw and a cabinet saw, and is stationary, with an internal motor. It is effectively a contractor’s saw that is mounted on a fully enclosed stand, with the motor installed inside rather than on the back.

What is a Hybrid Saw Table Used For?

Hybrid table saws are excellent woodworking tools that are at home in both commercial and home workshops. They have the resilience and endurance to bear the demands of residential and light commercial jobs that cabinet saws are capable of. They also ideal for the smaller and more intricate craft, and DIY projects.

These table saws can be used for jobs that require power, such as ripping sheet material and deck boards. They can also be used for making framing material to be used in bookshelves and entertainment centers. Hybrid table saws can also be used to make different types of furniture around the home.

How to Choose a Hybrid Table Saw

By now, the importance of owning a hybrid table saw is apparent. Knowing you want one does not however constitute knowing how to pick a good one. There are certain universal qualities that are desirable in a hybrid saw, and they include:


The first thing to look out for in your saw is the safety features it comes with. These are above and beyond the gloves, mask and helmet that you will be wearing when working on it. The first thing to look for is a riving knife. This sits behind the blade and is tasked with preventing kickbacks when you are cutting wood. This power button should also be easy to access, in case you need to shut the machine down quickly. Look for a well-built guard as well.


Most hybrid table saws are rated at between 1½ and 1¾ horsepower, but there are some that come with a motor capable of generating 3 horsepower. The amount, thickness, and the size of the wood you will be working with will determine the size of the motor to get. It is important to note that hardwoods require stronger motors than softwood.

Belt drive

There are two types of motor drive systems; direct and belt. The direct drive system connects the motor to the saw directly. The belt drive system on the other hand uses a pulley and a belt. The benefits to getting a hybrid saw with a belt drive are longevity and torque. You will however deal with a bit more noise and have to service the system more regularly.

Dust collection

This will be the difference between a messy work space and a clean one. It also ties in with health and safety. Most saws that are meant for use in the garage, come with 2 ½ inch collection ports, while hybrid ports tend to be in the 4 inch bracket. The bigger the dust collection port, the better the machine is for you.

Buying Guide for Best Cabinet Saw

If you did not purchase a contractor table saw before, it would not be easy to buy as a new user. In that case, how can you find the chief machine for your use? To obtain the best cabinet table saw, you have to know about the saw’s excellent features. Now we are going to guide you about the features of the best hybrid table saw.

Some of the Major Consideration for You


The first consideration for you is the machine’s weight because, in some cases, the other user will use the tool for a big project, or you have the need to transfer the device from one place to another.

For those reasons, the machine should be comparatively light. So the weight of a tool should be 200-300 lbs; it is a standard dimension. It will be easy for you to carry and set up.


Machine stability depends on the machine’s materials. Most of the machine tables are polished with cast iron. As a result, the table becomes smooth and increases durability. It will help you to maintain the accuracy of rip the wood.

Table Size

It is a significant feature for your machine. The speed of your work will depend on the size of the table. You cannot rip the big wood piece on the small table. So to work on big projects, your table should be more prominent. If you work bigger in most cases, then you have to choose bigger tables.

Blade size

How fast you can do the job; depends on the size of the blade for wood cutting. If the blade size is large, it can easily rip big trees or pieces of wood. Most of the table saw comes with 10-inch blades.

The 10-inch blade will be ideal for you because it can cut or rip many types of materials. If you want to buy a blade separately, then chooses the blade to combine with the machine design.

Maximum Cut Depth

You have to consider this issue. For cutting or rip the thick or wide wood, the blade cutting depth should be high. But the advantage is that most machines can cut the 0-45 degree angle.


The output of the machine depends on the motor’s HP. Most of the tools come with more than 1.5 horsepower. But you can get 4 Horse Power Machines if you have more research about the table saw.
It will provide the highest power for you. Some machines come with five horsepower, but it is not safe for the user because it is very speedy. 1-3 Horsepower is the standard strength for you.

Dust Collection

It is always essential for the table saw. Because these machines are created very dirt, and due to the creation of this dirt workplace becomes dirty. If your machine has a dust collection, then your time will not be wasted. The dirt will be preserved during work, and your work time will save.

Mobility Options

This is a very effective option for machine transfers. The wheel is attached to the machine stand, with which the machine can be transferred.


The stability of the machine is a beneficial and essential feature for the table saw. Because the price of a machine is more than $2000, that means you will have to invest a lot of money to purchase a table saw.

If the contractor table saw’s stability is less, then your investment might fail. If it comes with a warranty and the durability is more, then you can use it for a long time with heavy-duty apply work. If you have any problems, the company will provide you the service.

Safety Issue for You

Before using any machine, be sure to about the security issue. Most of the table saw has different safety features. Anti-kickback systems and blade guards are the most conclusive security features.

Both of these are important for a professional. Although the blade’s safety is most significant, the blade may cause deadly injuries to the hands or fingers. So by using the blade guard, protection can be ensured.

Moreover, you will have to think about your other safety issues. The machine creates a lot of vibrations, which can cause ear damage. So use ear protection to protect your ear from the quake.

Tips for Contractor Table Saw Maintenance

After knowing about the safety issue, you need to know some things about the saw’s usage because there are some rules for using the best commercial table saw.

  • The food cannot be stored upon the table, never. It can damage the smoothness of the table. 
  • Clean the table all time; It should be kept clean with sandpaper to protect from rust attack.
  • Before starting the machine, check it well, check the wire, dust collection, blade, etc.

Important Fundamentals

  • Size: If you have a small shop, then you’ll need a saw that can fit your available space.
  • Power: What exact tasks do you need to do with the saw most of the time? You need to have the horsepower and the rip capacity that matches your needs. It is one thing if your most common use is to rip hardwood that measure less than an inch thick. It’s another thing entirely when you tend to rip thick maple on a daily basis. 
  • Safety Features: Table saws are by their very nature inherently dangerous. So safety is always an important consideration. Most saws offer a riving knife as a way to prevent kickbacks. Kickbacks are after all the most common cause of table saw accidents. But you may find other safety features in the different models. These may include blade guards. 
  • Dust Collection System: This is one of the main problems with contractor saws, and it’s still a problem with lower-quality hybrid table saws. At the very least, you need to have a 4-inch dust port. Without a proper dust collection system, you don’t just have to contend with pesky cleanup issues. You also risk your health.
  • Quality: How good is the fence? The quality of the fence is the main factor in getting a great fit. You also need a high quality belt system, so that you don’t suffer slippage problems and power loss. One of the reasons why it’s very important to read hybrid table saw reviews written by customers is that you can get a fair idea of which models have fences that aren’t good and which belt systems are prone to breakdowns.
  • Ease of assembly: All the features won’t matter if you aren’t able to assemble the table saw properly. This should be easy, and the instructions should be clear. Problems with assembly won’t just get you poor results—it can get very dangerous! So read the reviews written by regular folks. What’s easy for an expert may not be that easy for newbies.
  • Price: You can’t really ignore this factor. After all, part of the reason why you’re getting a hybrid is because a full-size cabinet saw is way too expensive.

Hybrid vs Cabinet vs Contractor Table Saws

Before the advent of hybrid table saws, DIY hobbyists only had 2 options for saws.

One option is to get a cabinet style table saw, which offered the best features. These are big and heavy, and they’re very expensive. While the investment may be worthwhile for contractors, the price is too expensive for regular DIY hobbyists.

The other option is a contractor saw, which is much more affordable. But the problem with these saws is that they weren’t all that good, so you tend to get lower quality results. They don’t have enough power for your furniture-making needs and they’re hard to adjust. Often they also have very poor dust collection systems. These things need lots of proper maintenance, and they still tend to break down more easily.

The hybrid is the new 3rd option. It offers many of the features you see only in cabinet saws and not in contractor saws. They’re smaller and less expensive than cabinet saws. But they produce better results than contractor saws, and they don’t need as much maintenance. Check out the below hybrid saw reviews and you’ll notice that people just prefer hybrids to contract saws.

Hybrid Table Saw Uses

A hybrid table saw is ideal for any type of residential DIY projects orWoodworking.

This is especially true if you choose a decent one from our featured list. It can do the same residential and light commercial jobs that cabinet saws can do. It’s great for making small cabinetry and for craft projects.

With this saw, you can make a lot of different types of furniture for your home. You can make simple tables and chairs, desks, cabinets, and bookshelves.

Why Hybrid Table Saw Is Different?

If you’re familiar with the cabinet table saws, then you will agree that they can be very expensive. In fact, they are often way beyond the reach of the small budget contractor or hobbyist woodworker.

An alternative to the cabinet saws would be the contractor saws, which happen to have lower pricing. However, the contractor saws seem to be limited in their functionality.

To bridge the gap between both worlds, the hybrid table saw was invented. The major highlight of the hybrid saws is that they are less expensive than complex saws while offering more features than contractor saws.

In fact, they are often regarded as light-duty cabinet saws, and this is simply because they have a lot of things in common with the cabinet saws.

As earlier indicated, hybrid saws are designed to offer more power and functionality than contractor saws.

Consequently, they usually come with better fences, advanced belt style, and gearing, and enhanced dust collection systems, and so on. As a result, hybrid saws are able to create finer and more precise cuts.

In other words, a hybrid is basically an advanced version of a contractor saw with new features and upgrades borrowed from a cabinet saw.

The interesting thing about the hybrid saws is that they still manage to have a comparable price with the contractor saws.

The build design of a hybrid saw is similar to that of a cabinet saw, except that they are smaller, lighter and come with a smaller motor. Unlike a contractor saw, the hybrid saw has its motor inside its body. Many of them come with cabinet, while others feature open legs.

Hybrid table saws are great for both professional and DIY woodworking projects, especially those involving furniture making and craft. In the same manner, they can be used by both contractors and serious DIY hobbyists.

Here are some of the most important factors you should consider when in the market for the best hybrid table saw:

Riving Knife

A common risk associated with table saws is kickback. Having a high-quality riving knife can drastically reduce the risk of kickback. Therefore, ensure the table you intend to purchase brings with it this feature. Another important thing you need to know is that a riving knife must have a similar curve as the saw’s blade. It needs to maintain its relative position, when you raise, lower or rotate the blade. To protect against kickback, the riving knife is preferred over a splitter. 


Horsepower defines your saw’s worth. A lower horsepower means that your table will not cut through the materials you need for your project. A machine with more horsepower than necessary results to instability, which can lead to not only loss of accuracy but also accidents.

Here’s some important information you need to know regarding horsepower:

  • A 1.5 – 2 horsepower motor draws 18 – 24 amps. It operates on a standard 120 volt circuit. Such a horsepower can cut through 2’’ thick hardwood. If the hardwood is thicker, it requires more torque.
  • A 3 – 5 horsepower motor operates on a standard 240volts circuit. It can cut through 3’’ hardwood. With an increase in power, there is always the risk of kickback. 

Smooth and Accurate Cutting

Your hybrid table saw must cut wood accurately and smoothly. Its blade needs to be excellent enough to cut through wood without any trouble. You need to make crosscuts, beveled cuts and rip cuts with great precision and accuracy. Because of this, the fence and miter gauge need to be accurate. If your miter gauges do not do the job as they ought to, it is prudent to replace them. 

Dust Control

To enjoy a chaos-free environment, having a clean workplace is necessary. When working with a hybrid table saw, you need to be prepared for a ton of sawdust. Placing a vacuum at the back is one of the ways of handling dust. Alternatively, you can have a shroud over your blade to redirect the dust released. In addition to that, you should empty your machine’s collection bag frequently.

Left Blade Tilt

Left blade tilts produce less kickback compared to a right blade tilt. In most cuts, the blade is normally set up at 90 degrees right from the table. With bevel and angle cuts, you need to tilt the blade at different angles. Do you prefer blade tilt to cut wood on angles? If yes, then it is prudent to settle for the left blade tilt because it is safer compared to the right blade tilt.

Drive Belt Design

A drive belt connects a hybrid table saw’s motor and saw blade. The main cause for vibration as you operate a saw is the drive belt. Therefore, to ensure your device is stable, you need a high-quality drive belt. Poly-V belts are better than wedge belts and regular V-belts as they produce less vibration. They guarantee a smooth operation. A top-notch drive belt available in the market today is a serpentine belt. Compared to others, it delivers a higher power output.

Flesh Sensor

When using a hybrid table saw, your safety should be a top priority. For this reason, you need to buy a saw featuring a flesh sensor. Although it will add to its price, it is a necessary feature to guarantee your safety. This feature can stop your blade within 0.01 seconds of contacting your skin. Once there’s the brake action, the flesh sensor causes the blade to drop below the table level. On top of that, it shuts down the motor.

Sturdy Construction 

Sturdy construction and durability are among the most important qualities a product (read hybrid table saw) should possess. To improve the machine’s life, metal parts are better compared to plastic parts. The ideal material is cast iron, although it is heavier compared to steel or aluminum. Your table saw needs to feature a smooth and flat surface coupled with sturdy legs to withstand any conditions and work properly. 

Easy adjustment

Adjusting the alignment of a saw’s blade needs to be a walk in the park. Adjustable blades that are effortless to adjust guarantee smooth and accurate cuts thus improving your work’s quality. The blade’s height, fence position, and bevel need to be adjustable to work with your hybrid table saw comfortably. Moreover, device parts need to be easy to lubricate. Friction shouldn’t be there when adjusting the parts.


The best contractor table saw will offer the right balance of power and performance. Portability is where these types of saws underperform. However, considering their applications, it is a small price to pay.

When selecting a table saw for large projects, the power and blade are the most important factors to consider. Most are compatible with dado blades increasing the range of things you can cut with the saw.

Overall, a good contractor table saw needs to be able to cut materials of varying thickness. As a contractor, you are not limited in regards to the tasks that come your way.

Leave a Comment

This div height required for enabling the sticky sidebar